| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Door/Hatch | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000033Q3005X |
| Title: DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL POWER BACK DOOR UNIT
|
(a) Install the power back door unit with the 4 bolts. Torque: 14 N·m (140 kgf·cm, 10 ft·lbf) |
(b) Connect the connector.
2. INSTALL POWER BACK DOOR ROD
3. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH
4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH
5. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)
6. INSTALL REAR FLOOR MAT SUPPORT PLATE
7. INSTALL ROPE HOOK ASSEMBLY
8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
9. INSTALL REAR DOOR SCUFF PLATE LH
10. INSTALL REAR FLOOR STEP NO. 1 COVER
11. INSTALL REAR FLOOR STEP NO. 2 COVER
12. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH
13. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH
.
14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH
.
15. INSTALL DECK BOARD BRACKET
16. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
17. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
18. INSTALL ROPE HOOK ASSEMBLY
19. INSTALL LUGGAGE COMPARTMENT TRIM BOX
20. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|